Phone: 909-476-8007
Fax: 909-476-8023


 

SAF Machines

SAF Curvatrici: A division of TaurinGroup, offering the most economical machines on the market today without sacrificing Quality and durability. SAF machines are manufactured on a mass production level for the purpose of keeping up with demand and most importantly lowering material cost which is then passed on to our customers. The SAF line was first introduced into the market in the early 90's in response to the desire of a more cost efficient machine for the smaller job shops and companies with more general usage requirements.

Almost two decades later, the SAF line is still standing strong. With hundreds of machines sold yearly, it has been a reputable product for TaurinGroup USA and will continue for many years to come.

  • Versatility: SAF machines innovative design allows for a variety of different attachments such as: Spiral staircase, bar twisting and scrolling devices.
  • Diversity: With the many different SAF models, no job is too large or too small.
  • Quality: SAF machines are constructed using the highest quality and dependability components.
  • Integrity: With the SAF line, you can always be confident that the recommended machine will meet and exceed all expectations.



 

 
   
SAF Machines AS20-1

AS 20 - One of the world's smallest manual
bending machines, very popular amongst bending
hobbyists and all those who want to create specific
products with small profiles. Although this bending
machine is small, it has technical features that
make it incredibly versatile and vastly appreciated
by customers all over the world because of its
single driving roll with two adjustable bottom
rollers, which allows the end user to make changes
to the diameter.

Capacities from .25" up to .06" sections
SAF Machines BS 40

BS 40 - Weighing in at only 120 pounds, not
including the base, this machine is small, rugged
and portable with two driving rolls and a manual
adjustment of the top roll. This machine is used in
and out of shops such as on job sites. With a cast
iron body, hardened steel shafts and a universal
tooling set you can bend most general applications
(within capacity) using this unit. Special tooling is
also available.

Capacities from .25" up to 1.25" sections
SAF Machines BS 50

BS 50 - Pyramid style Roll Bender. Two shafts are
gear driven and are hardened, ground high
strength steel, which are supported by sealed roller
bearings for anti-friction operation. The BS 50 is
the first SAF motorized bending machine offered.
This unit can be ordered with a mechanical top roll
positioner or can be purchased with a hydraulic
cylinder and mechanical stop for the top roll
position and repeatability which will also include an
LED display indicator. This machine can be used in
the vertical or horizontal position.

Capacities from .50" up to 2" sections

Controls available - M = Manual top roll
adjustment, HV = Up and down pushbuttons for
hydraulic positioning of the upper roll.
SAF Machines DS 50

DS 50 - Like the BS50 series, this Pyramid style
Roll Bender has similar characteristics. Instead of
only having two driving shafts this unit has three
shafts that are gear driven, hardened, ground high
strength steel, which are supported by sealed roller
bearings for anti-friction operation. This unit can be
ordered with a mechanical top roll positioner or can
be purchased with a hydraulic cylinder and
mechanical stop for the top roll position and
repeatability which will also include an LED display
indicator. This machine can be used in the vertical
or horizontal position.

Capacities from .25" up to 2" sections

Controls available - M = Manual top roll
adjustment, HV = Up and down pushbuttons for
hydraulic positioning of the upper roll.
SAF Machines DS 80

DS 60 HV PLUS - Want more capacity for a
fraction of the price? We have improved our last 3
driving roll DS60HV unit by making it larger and
more rugged than ever before. Compare this unit to
our competition and you will see the difference not
only in price but in capacities. The latest design to
the Tauring line has proven to be very beneficial in
its by allowing optional accessories to be used
such as our spiral staircase, scrolling and bar
twisting devices.

Capacities from .25" up to 3" sections

Controls available - HV = Up and down
pushbuttons for hydraulic positioning of the upper
roll, HP = Digital display with positioner, NC-C =
NC control
SAF Machines DS 80

DS 80 - Pyramid style Roll Bender, this machine
can be supplied with a digital positioner used on
the upper roll for repeatability of up to 10 position
storage or an NC control which can store up to 20
programs, 30 steps per program, this equates to
having multiple bends on same profile being bent.
All three shafts are gear driven and are hardened,
ground high strength steel. This machine is very
flexible and suitable for a wide variety of products
in the field such as tubes, flats, angles, I beams
and special profiles.

Capacities from .25" up to 3.75" sections

Controls available - PQ = Digital display with
positioner, NC-C = NC control
SAF Machines DS 80

DS 100 - Pyramid style Roll Bender, this
machine can be supplied with a digital positioner (HP)
used on the upper roll for repeatability of up to 10
position storage or an NC control which can store
up to 20 programs, 30 steps per program, this
equates to having multiple bends on same profile
being bent. All three shafts are gear driven and are
hardened, ground high strength steel. This
machine is very flexible and suitable for a wide
variety of products in the field such as tubes, flats,
angles, I beams and special profiles.

Capacities from .25" up to 4" sections

Controls available - HP = Digital display with
positioner, NC-C = NC control
SAF Machines DS 80

DS 120 - Pyramid style Roll Bender with bending
radius predetermination, three shafts are gear
driven and hardened, ground high strength steel.
This machine is very flexible and suitable for a
wide variety of products in the field such as tubes,
flats, angles, I beams and special profiles. The
machine is composed of a welded steel frame. We
gave much importance to the stiffness and solidity
of the machines body without being extremely
heavy. All important mechanical parts are made
out of alloy steel, casehardened, hardened,
tempered and rectified. This machine is also
equipped with universal standard rolls and
swinging single control straighteners with hydraulic
adjustment.

Capacities from .50" up to 5.5" sections

Controls available - HP = Digital display with
positioner, NC-C = NC control
SAF Machines DS 80

ELECTRONIC ARCMETERS

Tired of the constant struggle of measuring radii? Our ARC Meter has changed the way
people measure radii all over the world. With three different models to choose from you
will have the ability to measure the internal and external radius of a section without
having to cross-reference to a separate number chart or calculate using a mathematical
formula. These high-end devices can give a direct reading instantly in inches or
millimeters. Our ARC meters have made it easy to reproduce parts, check repeatability,
or even duplicating arches from a jobsite. Don't frustrate yourself any longer with timely
methods of measuring arches, call today to get your ARCMETER